Lowering?

[1lowdiesel]

i think that looks pretty good, got a side shot?

 

[SKYNYRD]

:evil

I have found that cuttin one coil was not enough for me, I would at least cut 2 out. I cut mine with a torch as long as you dont dip them in water afterwards they should keep their strength. mines not street driven either no sharp turns of course I have 315s on it and the front end is pretty much on the bump stops

side view please!

 

[Johnny Big Rig]

you may want to put some limiting straps on if you are driving on the street because cutting just one coil off. can be bad news if you hit a big enough bump the coils can drop right out.

 

[1lowdiesel]

get in there and cut the bump stops.

 

[Johnny Big Rig]

here you go!

 

[1lowdiesel]

take the back down 4-5 inches and it's perfect.

 

[Johnny Big Rig]

get in there and cut the bump stops.

:badidea: it would sit on the axle if I went any lower, Its hard enough to turn as it is I have to make like a 6 point turn just to make a 90*LOL

 

[Johnny Big Rig]

take the back down 4-5 inches and it's perfect.

Maybe for you but I'm going for a pullin stance not dragstrip. Just thought mabe that would help you guys with your front end.

 

[roachie]

How many inches did that drop the front?

 

[morkable]

Chris you looking for a lowered 1000+ hp black truck? I still want to lower the front a little bit more and I want to put a srt10 bumper cover which will really stress the lowered look

sorry I dont have a better side shot to show you, but I really like the way it is going, I do want to lower the front some more yet though

Kevin

 

[Johnny Big Rig]

I had a leveling spacer in it before so i dropped about 4-5" estimating I don't remember where it was at stock height. mabe some else can chime in