pulling advise from the high horse power guys

I thought about trying 2" and did for the delta pull but that was also with the extra leafs
 
bounce

I ran a third gen the last two years and bounced like that one time and it was just because I wanted to run the stock class and it did not allow front weights. If you got a good set of traction bars then the only problem is that there is no wieght on the front. I will never hook to a sled again without them. Hope your class allows them. I ran 40 psi in rear and 30 in the front and yes I would slip the clutch out a little. You are probably running a smarty and they fuel way too hard taking off. Slip the clutch out at least 15 feet. Just my poinion though.
 
Yes it has a smarty and it fuel way to hard down low for street use. No weights at some pulls other allow but Haven't made a bracket yet
 
I guess I'm lucky, I pull 2.6 with weights, and some local street classes without weights, have never hopped. I run 60-70 in the rear, with 1 inch of travel. Fronts depending on track 15-30. I bring it up to 4200 and act like i'm doing the biggest burnout of my life and keep it pinned.
 
You must log in or register to reply here.
Back
Top