Super Dragon Flow 12V injectors

[zstroken]

Does anybody know anything about them? The 10 hole ones?

Hole size? Spray pattern angle?

 

[RonA]

S.S.

 

[Jim Fulmer]

10 x 16, don't know the angle though.

Jim

 

[Mo Smoke]

Thet were too big for what I needed and sent them back for something different that fit my application. they only had 200 miles and 5 pulls on the dyno.

 

[zstroken]

What was your application?

 

[Mo Smoke]

What was your application?

2000 F-250 4x4 conversion, automatic, 10" lift on 37's, 12v Excavator motor, studs, girdle, o-ringed head, springs, Schieds 12mm pump, HTT 64/71/13ss 3rd gen turbo, pull the sled 12 times a year, tow 3-4 times a year, daily driver that gets 600HP on fuel 700 on 1-shot NOS, does not haze white at idle...ect. As I pm'ed you before the dealer sold them to me and were too big for what I needed and Brady took care of it for me.

 

[zstroken]

I remember the PM. Guess I wander how they would compare to say a 5x.017 or something.

 

[RonA]

10 x .016 is 76% more than 5 x .017.

 

[Mo Smoke]

:doh:I wish I could have helped ya out..

 

[zstroken]

10 x .016 is 76% more than 5 x .017.

Yes, but what about surface tensions, frictional losses etc? You have much more surface area.

 

[Smokinrebel]

wow 1016's are big...couldn't imagine driving them on the road

 

[Jim Fulmer]

There not as bad as you think, I ran the very first.

Jim

 

[richsdieselperf]

do you guys think 5x22 will be streetable?