Water Injection Systems???

[DrSpeed]

http://www.painlessperformance.com/webcatalog/largeview.php?SearchField=65002

 

[hummin cummins]

What about the mechanical h2o injection. The one that mount where the vacume pump is. Does anybody know what pump they use for this application?

 

[JerrodGlover]

The mechanical pump that is used is called a Vickers Pump.

 

[BigYellowIron]

You got any pictures of your system Jerrod? I was going to use a hydraulic power unit from like a snow plow, but I am cheap and try to find the cheapest way to do it right.

 

[hummin cummins]

The mechanical pump that is used is called a Vickers Pump.

Do you who the supplier is.

 

[9 LIVES]

I've built a system using a Haldex hydro pump found on www.northerntool.com

Got mine through a dist. for $125.00 1K PSI regulated & hooked to 4 nozzles from John deere. $250.00 into the complete system becuase im using braided hose.

 

[BigYellowIron]

I've built a system using a Haldex hydro pump found on www.northerntool.com

Got mine through a dist. for $125.00 1K PSI regulated & hooked to 4 nozzles from John deere. $250.00 into the complete system becuase im using braided hose.

Wow thats cheap for the pump, I have only found them for like 300 bucks. You have the name of the distrubuter?

That is kind of what I want to do.

 

[JerrodGlover]

What kind of John Deere Injector?

 

[BigYellowIron]

Well to keep this informative. What PSI and what kind of flow rate should be used, for a single charger 3 inch and a 13mm pump with 5x20 injectors about 4500 rpm

 

[dragnsled]

What kind of John Deere Injector?

He said nozzles...probably for a JD sprayer

 

[kino_fab]

I found a deal on a Snow kit, probably has the 150psi pump though. I don't know if that would be enough for mine though.

 

[9 LIVES]

Wow thats cheap for the pump, I have only found them for like 300 bucks. You have the name of the distrubuter?

That is kind of what I want to do.

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200329762_200329762

It was a buddy buddy deal. I can see if I can get a few more
The jd spinner nozzles can be found at any JD AG store that carries the spraying equipment. And I got the lines custom made locally but they are the same as whats sold on jegs.com

 

[Old Blue]

We got our Kit from Devils Own Injections for about 1/2 the price of a Snow kit & comes with a 250psi pump. :st:

 

[BigYellowIron]

I actually found a pump like that for free off of a tommy lift. What about these nozzles: http://www.mcmaster.com/#spray-nozzles/=zmhi7

 

[hpprose]

op:

 

[XLR8R]

XLR8R how much water do you want to spray? The pump will keep up if you size the nozzles appropriately.

The 12-runner manifold is currently set up with a set of nozzles that add up to ~7.5gph... hoping the Shurflo is enough to keep them from dribbling!

I actually found a pump like that for free off of a tommy lift. What about these nozzles: http://www.mcmaster.com/#spray-nozzles/=zmhi7

Those are similiar to the nozzles we spec - the micron rating & pump pressure overhead are crucial to good atomization.

 

[JerrodGlover]

I actually found a pump like that for free off of a tommy lift. What about these nozzles: http://www.mcmaster.com/#spray-nozzles/=zmhi7

Those nozzles come from a very reputable manufacture in the water spray marketplace. Only problem with them is how to mount them into a pressurized pipe.

 

[BGarofalo]

Those nozzles come from a very reputable manufacture in the water spray marketplace. Only problem with them is how to mount them into a pressurized pipe.

Its not too hard, all you have to do is tap the inside of a brass nipple and round the edges off. Then you tap your port with 1/4 inch npt.
Example from same supplier: http://www.mcmaster.com/#brass-(schedule-40)-pipe-fittings/=1063r0

 

[JerrodGlover]

So if I understand this right you would tap the inside of a nipple 1/8" NPT and the outside 1/4" NPT?

 

[BigYellowIron]

Thats what I was going to do. Done it in other applications with good luck.