RacinDuallie
Black Sheep Racing
- Joined
- Apr 24, 2006
- Messages
- 17,369
Any issues to watch out for when building?
Tips?
Gonna be 13mm p pumped. (Seth)
Discuss.
Tips?
Gonna be 13mm p pumped. (Seth)
Discuss.
No, but in for the results. What project is this going in?
can also use commonly used shelf pistons with mods along with modified spray pattern nozzles.If you're planning on 1300+hp I would suggest sleeving or a deckplate. Have people made more without it? Sure. 4.125 is a commonly used bore when sleeved that is plenty strong, factory 5.9 bore would make for a cheaper setup since you can use factory pistons. Put cam bearings in it. The rest has already been mentioned.
To answer the last question, they dont like much timing. I know of a setup running wide bowl CR pistons in a 12v with standard pattern injectors and it goes downhill power wise at 28*, and fast
Sent from my SM-G930R4 using Tapatalk
I'm aware. I was replying to the comment directly above mine, asking how poorly it would run with factory 6.7 equipment, and factory angle 12V injectors. It's not ideal.can also use commonly used shelf pistons with mods along with modified spray pattern nozzles.
:what:
wet or solid?
I like mine. It’s worked well for me for 2 seasons now
Sent from my iPhone using Tapatalk
Hmmmmm.....
That's your deal not mine?! Lol.New ashtray ?
wet or solid?
Can you elaborate more on the build?