Recent content by undrpsi

Complete Part out of 10 running engines, all 53 blocks. Pumps, injectors and most turbos are gone. Bulk deals are welcome. I can assist with shipping / freight. I have fork lift access and freight accounts set up for pretty inexpensive LTL. Pistons: $10 Rods: $30 Camshafts: $100 Blocks: $150...

I'm selling both of these as good rebuildable cores thinking they'll need to be gone through. I'm 95% sure this is a GTA4508V, 80mm comp wheel, .69 AR Comp housing and a 1.72 exh housing. Turbo spins well, but looks like there was a slight amount of contact between the wheel / compressor...

Hey Guys, I've got a few 6.7L engine components I'm going to get rid of.... 6.7L oil pan (has a few dents, missing drain plug, but good pan) - $100 plus shipping 6.7L block - shot peened and checked for cracks, one cylinder will need either .020 or sleeve to match rest (pistons / rods are...

Hey Guys, I'm looking for 20-30 FCA's (fuel control actuator) that fit to the back of CP3's. They can be Dodge or Chevy units, 5.9, 6.7, or 6.6. They units can be mechanically / electronically bad, they just cannot have any physical defects. If they are broken or have broken tabs, they will...

Hey Guys - I'm looking for somebody that is going to the TS event from Houston (or surrounding area) and would be willing to take a rotating assm (6.7L block, crank, cam, pistons, rods) to the TS event. A fellow Comp D member is purchasing it from me, and he will be at the Thursday night event...

Looking for a bad or leaking 6.7L intercooler. It can have a hole through the middle of it, I just need it to fab up bracketry. Preferably the later model intercooler (I believe they changed design mid 08, I'd like the 08.5+) Thanks - Justin

I've got 3 CR fuel rails with PLV and Pressure sensor - $125 shipped I've got 4 CR cylinder heads - all came off of running motors - $400 plus freight Any questions? Feel free to PM. Justin

I've got a good set of 6.7L injectors that I'd like to move. They have been tested cleaned and are verified good. They are wrapped individually and are ready for install. They had 21K miles on them when pulled. $1200 shipped plus a set of cores back

I've got a HTT HTB2 - 65/66/14 Sled Puller for a 3rd Gen I don't know alot about the turbo other than it is ugly and tight. It came on one of the motors I was parting out. $700 shipped takes it. Feel free to ask questions - I'll do the best I can to answer them.

I have a set of used 04.5-07 pistons in excellent shape. They have been cleaned (soda blaster) and are ready to ship. I also have new rings for all pistons. They are still in the box and standard bore. Looking for $600 shipped for all of it. PM with any questions.

1. - Complete set of injectors that came out of a 2006 - 38K miles on them. (Will work on 04.5 - 07 for all the newbies or if you have an 03-04, bodies will work, you switch the nozzles. ) I had them tested and cleaned @ M&D in Houston, and they came back with a clean bill of health. I had...

I have a 2wd G56 Transmission for sale. Had about 68K on it when taken out of a wreck. This was the AD model - it came out of an 06. I have a complete clutch and flywheel setup taken out of the same truck. It appears to have about 60% left on it. If you live around Houston, Austin or SATX, I...

I have a bone stock cylinder head that came off of a 2007 5.9. It has already been to the machine shop and been spec'd and checked. Has also been baked and cleaned. No issues whatsoever. I would be more than happy to get freight quotes and drop if off at a freight dock in Houston. If you are...

I have a good 6.7L head for sale - Came off of an 08 with 35K miles. If you want to have the intake milled off for custom intake manifold application, I can help with that and send it already prepared. I can also have it predrilled for a Hellmann intake. $800 plus the ride. mill / drill work...

I have a 12v engine and auto transmission (2wd) that came out of a wrecked 96.... The engine is complete from fan to flex plate...turbo and injection pump are there - it is complete. The truck only had 140K on it and I have the instrument cluster out of the truck to prove mileage. Engine /...