Search results

Take out core 5.9 engine from my 2007. Had 304k miles, suspcted broken ring(s) on #5 as it lost compression and it is scored. Oil pressure was good at time of removal. oil pan still sealed did not remove. Includes head, timing case etc. $900 core cost. Good for someone who pulls a good running...

Does anyone have a cad or solidworks file or dimensioned drawing layout for the deck of a 5.9 block? Something that could be used to make an accurate torque plate? Also looking for one with full details of oiling and cooling holes to have a copper head gasket cut. Sent from my...

My 5.9 gave up on me at 305k miles, so I found a good 6.7 motor to put in its place running 5.9 electronics and fueling. Got the swap underway but I need to decide on turbo set up for towing my puller around. I am trailer and pull truck weighing in around 14k maybe 16k if I buy a bigger trailer...

Genuine posi lock cable not the china knock off. Used but all parts are there, no wear or problems. $100 Sent from my SAMSUNG-SM-G891A using Tapatalk

D80 mini spool for 37 spline axles- $350 D80 housing from 02 with disc brakes, brakes will need components replaced but nothing was cut off. Has heavy duty brackets welded to tubes for traction bars. Has LSD carrier for mini spool and 3.54 gears, 1480 yoke, no axles- $500 Pair of 89" long...

Does anyone know the trick to making an AD motor last? My latest replacement which I paid $230 for got me 74 days and 2000 miles of service before its blowing fuses. What good is a lifetime warranty if the motors keep leaving you stranded at the worst time and you have to wait 3-5 days to get...

My father's 04.5 started running rough when he fired it up in the morning 2 days last week. He said it idled rough for a little bit then got warmed up and ran fine all day both days. I stopped by Friday after work and he fired up for me to hear, and it was definitely missing and won't idle for...

Are there different transmission crossmembers for 2nd gen trucks for auto, 5spd or 6spd? My puller is an 02 that was originally a 6spd and the cross member is very wide. I've seen many write-ups where 5spd trucks have swapped to a 271 t-case without issue, but when I put the 5spd in my truck...

Trying to help my neighbor out with his 05. The truck has been babied, its 10 years old with 54k on the clock, light snow plowing, the heaviest it has towed has been a dry 20 ft camper. He is 64 years old and drives like it. The transmission has a very harsh downshift banging as you come to a...

Anyone know where I can find an adjustable gear for a P3000? Scheid can make one for me but not until I send them a core gear to machine as they are out. Hoping to find one by the end of the week if possible.

I am trying to find an adjustable gear for a P3000 pump, which is a smaller shaft diameter than the P7100.

I've been hearing lately that the adjustable cam gears like kenny's are shearing the small alignment bolt and the other larger bolts do no have enough grip to stop the gear from turning and thus changing the cam timing...which would make for a bad day if you are a valve or piston. Just...

What is the recommended method of welding the drive coupling on a vacuum pump gear for a waterman or other mechanical fuel pump? I've seen where some people MIG them, so I did just that. I tacked it in 4 spots, checked it for alignment and it was straight, so i burned it on by alternating sides...

I have the cam sensor and the CNC relocation bracket for a p-pump swap that I am not using on my new motor. Was working fine when I removed it, read up to 5100rpms on the cam gear. Does not include 2 small bolts to mount to timing cover. New bracket is $50 from Eatsoot.com New CPS is $54 from...

A friend of mine runs crew for NMRA small block turbo car that is new to their team this year as they always ran a nitrous big cube set-up before. In whatever class they're in they run the midframe precision stuff and recently alot of guys have been dropping from 88mm to 85mm units because...

Anyone using the marine style 12v injector return that goes behind the valve cover know what fitting is on the end of it? its some type of flare with a thick rubber washer to seal it.

The pilot bearing for my clutch is spec'd to have a 20mm I.D., which is .787" ( I measured it at .785") however, the upgraded input shaft for my transmission has a pilot shaft O.D. of .755" leaving .030" of play. This seems loose, but I do not know what is considered normal. I know that it...

Has anyone gutting ALL of the factory wiring harness out of a puller or race truck and wired in small aftermarket distribution block. I would need a main ignition power on to supply power to everything, and a starter button, then I need switched circuits for the following- -dash/gauge lights...

Is there a special throw out bearing use on these style clutches? i can get numbers off the pilot bearing to get a replacement, but I never had the throw out bearing to go with it so I have no idea what to get for it. if its a normal TO bearing can someone give me the part number where I can...

Since I am not having any luck in moving my S483, I am thinking the better option here may be to sell the wheel and cover, and get a protrusion 3.0 legal billet wheel and cover for it to at least get me up and running later this year. No debate needed here about the 480 being a childs toy in a...