Search results

Was wondering if someone could check something out for me. Does apply pressure show up on the monitor while in reverse or only in drive. I swore mine used to show pressure in reverse but now it dont.

Searched quite abit and really couldnt find anything. I have a 48re swap in my 09 so my 4 low is not working yet. I have a sled pull coming up this weekend and I am wanting to pull. Has anyone ever tried ever pulling in 4 high before. I have a stage 6 ats with pcs controller. Not sure if I can...

I am trying to get true manual mode to work on my 48re swap in my 09. Right now I have the brown/pink wire tapped into my old exhaust brake switch. Which is input 16 and I have it selected to momentary and true manual, when I push the button it will show on the monitor it is getting the signal...

There are a few different bands you can get made from different material. Which is the best, and what is each material for. I know there are the flex bands and the rigid bands. Kevlar, carbon fiber, red eagle and a few other choices of material. So far I am 0-2 on front bands. First pics are the...

I have always pulled with manual trucks, so havent had any problems boosting up off the line with them in the last 4-5 years, but this year I am pulling my mega in 2.6, first hook didnt know how the tranny would hold so I take it easy, and just barely powerbraked and didnt build and boost and...

i got my prototype head gasket installed yesterday, some of you have heard about it, but its a three layer gasket, the fire ring is cut out of the gasket, and firerings were made to go in place separate, the rings are .010" thicker then the gasket, and they should crush down and give a better...

buyer/seller before of I C Smoke aka evans diesel, he has ripped alot of people off and looks to of started this new screen name after a bunch of problems arised. Evans Diesel Ripped Me Off - Competition Diesel.Com - Bringing The BEST Together

dont know any info but was posted in the numbers here, i think he might be on here PFI results for Oct 2nd - Dodge Cummins Diesel Forum

I seen a lot of people say different on this subject, but when adjusting a gsk kit when you put more clicks in it or tighten it up does it lower your rpms or does it raise them. I was under the impression and what I have seen the looser you run them the more rpms you will get, and the tighter...

Ok guys I have been beta testing the tcm tune from h&S and so far i am really impressed with it and have seen no problems what so ever. The shifting is so much better then stock, the tc locks up alot sooner in the gears and stays locked up for me. I do not get the annoying downshift anymore that...

I went to the car wash and washed underneath my hood, on the way back from the carwash a half a block away from my house the truck started reving up and down, kinda wanting to run away, i hurried and pulled in my house and put in park and it loped real bad reving up and down. I shut the truck...

going to be moving up to 2.8 class this year, and was wondering what egts you guys are seeing pulling the sled, in my area we run nadm rules except we get to run water, so water or no water what are your egts.

we had a dyno day yesterday at gillett diesel, matt moon won the open class with a 914 hp run on his dmax. number is uncorrected also.

installed a 5k gsk on my 12v and it idled at 3000 rpms so backed the idle down all the way, now it idles at 2000 rpms and i have to give it throttle to start, and it free revs to about 4600 rpms also. Any ideas on what to do, loosen or tighten the nut more.

just got done putting a hse 63/17 on and 370 injectors, I also made a zero plate and have it in, it pops alot sometimes when I pin it and it only will free rev to 3500 and no farther and takes a sec to get there, I also have a fuel leak on the number 6 injector return and i think the little bolt...

i need a 5"/4" downpipe for my 96 12v with a 5" v-band clamp, or just the flange to weld onto another downpipe thanks

ok guys pulled with a g56 last year and was running 4th gear with 37" tires coming off the line at 3500 rpms, this year I have my 12 v I am pulling with. 33" tires going to come off the line at 4000 rpms what gear should I use, I have an iron giant so not worried about that part, but 3rd or 4th...

Burley, ID 6/13/2009 ? rmpa (state fair qualifier) Idaho Falls, ID 6/20/2009 4:00PM united Spanish Fork, UT 6/27/2009 7:00PM united Tremonton, UT 7/25/2009 4:00PM united Elko, NV 8/1/2009 7:00PM united Worland, WY...

you look at all the rules and they all say The exhaust must exit rearward of the driver’s compartment. Stacks exiting through the hood or fender-well are prohibited for the 2.6 and 2.8 class, how strict are they on this rule i want to put a hood stack on but will I have to remove it to pull.