Hopefully this weekend. I spent some extra $$ on shipping and thanks to Gary @ Schieds I'll have the lines here hopefully tomorrow, and also Snedge saved my @$$ on pump parts, he is the man. Now I just need to figure out how to degree a cam, the Maxspool 2.5+ is going in.
That's the spirit! Heck you've got it torn down this far why not! I'm REALLY pumped (no pun intended) your getting this thing put on. Hell I remember when you first got those twins mounted up!! That truck is really takin shape!
all these p pump threads are making me wanna p pump my truck but i know nothing about them when it comes to tuning them
Well I got home from work and my lines, Pump fitting, and 40psi spring for the AD150 are here. Tomorrow I should be getting my cam sensor relocator, 4k GSK, 191 DV's, and mack rack plug. Then if all goes well I'll be getting a box from zach hamilton and have a maxspool for sale that I feel is a little big for my application. I have the lifters up and the cam ready to come out. In the morning I'll be on the hunt for a TPS plug, oil fitting for the block, pump, and an oil line and that should be it. I might actually have it done.
first time i saw this i knew i made the right decision...
[MEDIA]http://www.youtube.com/watch?v=l5CJGLkDFhs[/MEDIA]
Well today was a complete waste of time and I dont think there is any way I can finish this weekend. I went to practicaly every place I could to find oil fittings for the pump and block. I thought I had it but no dice. I'm gonna check tomorroaw at a fe more places then go from there. Bad thing is there was a little bushing type thing that was on the oil inlet fitting on the inside of the pump. I pulled that all out and put the plug in and moved the plug to the inside. Then I put the inlet fitting on the outside for a test fit and now the bushing is stuck. So the fitting is stuck with no way to get it out without messing up the threads that I can see. I cant find any fittings to match the threads on the pump, and I only have 2 days left to finish. I am gonna think hard over some beers and start fresh in the morning. Bad thing is half the day will be spent waiting for the delivery guy to drop off my cam.
look at the bright side....
now you know where NOT to look for oil fittings
&
soon enough you will be posting video's like TJ