Let's see your weight brackets.......again.

[DAFBFD58]

Its in the article 101 diesel pulling or something like that

Sent from my DROIDX using Tapatalk 2

 

[Jacob 76]

I couldnt find the image on the internet so I had to take a picture of it with my phone but here it is... September 2012 of Diesel World pg56

 

[Commonly_Railed]

Hell yes! Thanks alot I just bought a coppy. The truck was running like crap that day but with a little help from mr. Chase Fleece at the ts pull it runs like a top hitting 5000 with a ssr smarty. The only reason he came over n talked to me was because of my weight box!

 

[Jacob 76]

No problem, congrats man. Glad to hear that the box is a good attention getter and you got the tuning dialed in. The same thing happened to little6cylinder a couple years ago. He made the centerfold in Mud Life magazine and the only reason he found out about it was because a friend showed him at school. I mean I understand writing a magazine article is tough but how hard is it to listen to the announcer before/after the run and write down a name.

 

[Cummins41]

Not painted yet, but here's mine.

[/IMG]

[/IMG]

[/IMG]bucket.com/albums/h425/Cummins41/IMG_20120725_213128.jpg[/IMG][/IMG]

[/IMG]

[/IMG]

[/IMG]

 

[MoPower05]

 

[Bersaglieri]

Not painted yet, but here's mine.

Nice work, I like that design and good pictures of how you mounted those receivers.

-Dustin-

 

[Schrowang]

Hell yes! Thanks alot I just bought a coppy. The truck was running like crap that day but with a little help from mr. Chase Fleece at the ts pull it runs like a top hitting 5000 with a ssr smarty. The only reason he came over n talked to me was because of my weight box!

I talked to you guys at the dyno day april 1st. Did you end up getting better numbers out of it on a different dyno?


Posted to CumminsForum via autoguide for iphone.

 

[Jacob 76]

That water/air setup is sweet!

 

[young12valve]

 

[MoPower05]

All worked good intake temp at end of pull was 80 degrees.

 

[ikeG]

Looks good CJ!!

 

[lincolnlocker]

anyone have ideas or better pics for a superduty weight bar?

 

[6.4 F-350]

anyone have ideas or better pics for a superduty weight bar?

I would build off the factory tow hook plates so it could be removeable. Just make two plates and weld a reciver to it and build whatever style bracket u want, then for the winter remove the recivers and put the hooks back on.

 

[ryanss22]

any pictures of a weight bracket on an OBS with the bumper still intact??

 

[bubba2400]

I would build off the factory tow hook plates so it could be removeable. Just make two plates and weld a reciver to it and build whatever style bracket u want, then for the winter remove the recivers and put the hooks back on.

Tow hooks is the easiest way to do it.

any pictures of a weight bracket on an OBS with the bumper still intact??

It's a pain to do it. I had to cut the one bumper bracket off and then made a big bracket behind the bumper with two receiver tubes on it.

 

[ryanss22]

would it probbly just be easier to cut holes in the bumper and weld recivers to the frame just be done with it?

 

[bubba2400]

would it probbly just be easier to cut holes in the bumper and weld recivers to the frame just be done with it?

No, the front of the frame is a pain no matter what. With the front spring shackle in the front of the frame it makes it hard. Make it so it looks nice.

 

[DirtyD12]

StackedMax who made your weight bracket? sharp looking

 

[rnemovr]

Looks homemade but I've been known to be wrong before.