Here's a little of mine.
Stripped down.
Starting the matting (1st pic is a friend laying it down). 2 layers of mat (3 on the trans tunnel) and 1 layer of closed foam, but after the second layer we were getting a little sloshy and i forgout about the camera. wish I had pics of the end with it foamed.
We did a little more touching up then a full layer of foam.. no pics tho... :doh:
Head unit
Front 5.25" kickers (don't have pics of the 6.5" MBQ's in the doors or the 6x8 MBQ's in the back pillars). Components have 95 watts to each.
Three JL 10w6's behind the rear seat. 600 watts to each. :rockwoot:
One of these days I'll get pics of the amps and all under the seat. Hits really hard and sounds really good, I mean definitely the best system I've ever had. This is what I put in after pretty much all the same stuff got jacked out of it earlier this year. After the truck got broken into, I decided to mat the truck, always wanted to and then was the perfect opportunity.
I got all my matting from
RAAMaudio. This stuff worked great, the guys there were EXTREMELY helpful and they seriously hooked me up. Also, check
this page out page out. Lots of good info, what sold me was the temps and how a lot of the matting failed. We see hot hot temps here so I wanted some good stuff. Only dynamat I'd use is the Extreme, then that's so pricey, this stuff works as good for a lot less.