VE rebuild with pics Look inside

Going a little farther you can remove the governor assembly

1st remove the jam nut at the front of the pump and unscrew the shaft
slowly slide it out and then all the parts will be free and can be removed
Don't be afraid if the weights in the governor fall out they are easy to re assemble.

100_1246.jpg


100_1247.jpg


100_1248.jpg


100_1249.jpg


100_1250.jpg


then You can remove the (2) 3 - sided studs on the side of the pump You can buy the tool from Bosch or you drive a 6-pint 1/2" socket over it and get it out. I suggest the correct socket. when they are removed then you can get the other levers out.

100_1254.jpg


100_1251.jpg


100_1252.jpg


100_1253.jpg
 
To remove the roler ring you have to remove theis clip that covers a pin that holds a rod that links it to the KSB piston.

100_1260.jpg


100_1261.jpg


100_1262.jpg


then you can remove the piston and ring

100_1263.jpg


100_1264.jpg


100_1265.jpg


100_1266.jpg
 
Now you can remove the shaft

There is a small keyway that will fall out its fine it drives the (supply pump) vain pump inside.

You can also see the two Buffers that will need to be replaced.

100_1267.jpg


100_1287.jpg


this is the supply pump suport ring

100_1268.jpg


Pump

100_1269.jpg


100_1273.jpg


100_1275.jpg


here is the pump The small notches must go back to the inside and sould be placed in the same slot they came out of.

Then with the front seal removed you can see the two bushings that can be replaced if worn badly.
100_1279.jpg


100_1274.jpg
 
now to dis asemble the top

first you will have to drive out the 2 BB's on the side
Just drive from one side till the BB falls out of the other side
Then drive the pin back to the side you started on till the other bb falls out.
Then the pin can be removed and teh AFC lever removed



100_1281.jpg


100_1282.jpg


then remove the allen plug from the front of the housing
youcan then remove the allen head plug that holds the O-ring in place around the small pin that rides on the Fuel pin.

100_1284.jpg


100_1285.jpg


100_1286.jpg
 
CAN THE VE AND VP PUMPS DELIVERY Valves be opened up like on a p-pump ? would it work for more power ? wonting to know about the size diff on the valves what size are thay now ? in both ve & vp pumps . I have hered that the ve s are bigger than the vp Thank you for showing us this info
 
The dv's in a ve pump are already full cut. The mods that you would do to a dv on a p-pump have been done to a stock dv. I don't know of any dv mods that have been done successfully on a ve pump.

Great pics!
 
Wow, nice work. This will certainly make rebuilding the IP easier, as well as making some of the mods a little clearer. Thanks.
 
Back
Top