12&24v cr head blocks etc WILL BE AT NUMEDIA

white99

New member
Joined
Sep 26, 2008
Messages
728
12v block with 14mm mains. Needs boring 20 over asking 300
24v block with 14mm mains stock spec asking 350
03 head needs valve job and surfacing asking 200
24v head clean.north heads are bare. Asking 250
12v lines and return line 150
Stock 24v connector tubes asking 100
12 DV holders asking 100
AFC housing asking 50
2 sets of Brazil rods 200 each
USA rods 200
12v rockers 50
2 12v tappet covers 30 each
01-02 timing case 150
Stock cams 3) asking 60 each
12v valve covers 50
Stock dodge 24v valve cover 50
Oil pan 100
Pickup tube 100
Cam gear 75
01-02 can gear with tone ring? New on PDP their 700 asking 200
VP pump gear 50
Toyota supra tail lights 200
6" Aussies 36" like new 250

IF YOU ARE INTERESTED IN ANYTHING CALL OR TEXT ASAP 609-500-5574
CAN BRING TO NUMEDIA OR STEAM O RAMA

AGAIN 609-500-5574 THANKS-SCOTT
 
Bump it up .Id like to move this stuff n meet in pa preferably
 
Also have a stock hx35 and a industrial injection 62-65-14 with semi polished cover
 
PMS replied.any serious interest please call or text .its a lot easier-scott
 
YOU SENT ME A VP44 HEAD!!!!!! I paid you for the CR head!
You won't return my text, emails, or calls.
You have no PayPal or voicemail, this has been a pain in the A SS and then you stick me with this!!!!!
WTF??
Wanna solve this?
 
YOU SENT ME A VP44 HEAD!!!!!! I paid you for the CR head!
You won't return my text, emails, or calls.
You have no PayPal or voicemail, this has been a pain in the A SS and then you stick me with this!!!!!
WTF??
Wanna solve this?

Be very happy you didn't get the CR head. I bought it and its junk.
 
7eqehuqe.jpg

I smelled something fishy from the get-go.. I should have known better.


Sent from my fphone
 
If he'd have had pay pal at least you could have disputed it once you found out he sent the wrong head. This sucks, here's hoping everything gets worked out for the good. :Cheer:
 
Top