12 valve engine build pros

badassr1 said:
765 corrected at 6,000 feet. What does the HP the truck made matter? I want to know what to use lol and will last longer and be stronger at a 800HP level.. I dont see why everyone is making this some complicated..
Click to expand...

765 CORRECTED @ 6K' is like 313.62hp...makes sense with the ATS parts;);)

Your 16mm plungers don't seem to be working that well:p Maybe try a set of 6K springs, and you might crack 400hp UNcorrected!
Chris
 
Smokem said:
The piston I recommended is pictured in post #23, the part number for the 0.020" overbore and coating type is in post #26.
Click to expand...

Thanks for your advice.. I compaired your sugguestion to the number i found.. Looks like yours would put me at 15:8.1 area and mine would be around 17.. I think for driveablity of everyday Im gonna keep the compression up a little more.

But again thanks for your time.
 
maybe all these badass parts are in his house on the beach in arizona and he forgot the code to tell sasquatch to go lay down when he wants to get into the house.
 
Hey was your truck the white extended cab with the black rockstars at bandimere a couple weeks ago??
 
If ats supplies many of the parts for your truck why don't you ask them about pistons?

ride42 said:
I'd use a s595 for a single and spool it with a can of Duster.
Click to expand...

You never know... there is a guy on DTR that says he tows with a S510 95mm on a 12mm ve truck! I was told to read the DTR rules due to my :poke: :poke: of the topic. :doh:
 
Um, am I the only trying to figure out how you tow with a 700+ up 12v?

Until I see pics of this sigma I call BS.
 
He has ATS 3k/5k twins. You can tow with 1k hp with those, at any altitude and temperature!
 
i met him before no idea on the sigma pump or this 16mm p7100 nonsense his truck sounded and ran like a 12mm with 5ks not a 13mm or bigger. he isnt duky though i can vouch for that. and 15.8 to one would be daily driveable in my opinon =D.
 
That was a pretty good running truck. Looked good to. I didn't get a chance to talk to the guy though. Lostnwalmart are you the guy with the twin turbo 24v with the black stack that I was talkin to that night?
 
97crewcab said:
If ats supplies many of the parts for your truck why don't you ask them about pistons?



You never know... there is a guy on DTR that says he tows with a S510 95mm on a 12mm ve truck! I was told to read the DTR rules due to my :poke: :poke: of the topic. :doh:
Click to expand...

Kind of what I was thinking.
 
You must log in or register to reply here.
Back
Top