II 14mm Pump

zstroken

zstroken

For $$$ your name here
Joined
Sep 27, 2006
Messages
23,151
Anybody ran one? What application? How did it fuel to 5k-5.5k?
 
I have. Was setup for 5K+

I ran mine 4900-5100 pullee hard. Was smooth for a pump of that size and fuelng ability.

A few others on here have and are running them. Just can't say who. They'll have to speak up on there own.

~Wes~
 
Help me out here wes, what kind of HP numbers, can you shoot me a dyno graph? Tell me what else has been done.
 
what green ford????

Wes, did it fuel alot harder than a 13mm ag pump ? what injector size were you runnin with it? are you still runnin it or did it stick a plunger?
 
thats going to need some proving right there. Last I heard Richard didn't touch II stuff.......
 
Jetpilot said:
Richard is not runnig an II pump.
Click to expand...
No I am not running a II pump, and never have. The turbos before Turbonetics were A5K from ATS, and B52 from Turbo Auto Diesel.
 
TMONEYDIESEL said:
lol he sells industrial injection pumps and injectors out of his store
Click to expand...

Just because he sells II doesn't mean he has to run them. Vendors sell lots of different parts from different manufactorers, no way they could run everything they sell.
 
TMONEYDIESEL said:
lol he sells industrial injection pumps and injectors out of his store
Click to expand...

I sell Bullydog, Edge, Magnaflow, MBRP etc. and I don't run anything from them on my truck.:hehe: And so what's your point?
 
MADDOG said:
And what parts would that be?
Click to expand...

You know what parts! The Conifler rod, the cunooter valve and don't forget the headlight fuild.:hehe: :hehe:

Sorry, I had too....
 
Can somebody inform us Bosch # of 14mm plunger/barrels?

Or is this # TOP SECRET ? :poke:
 
lets get back to the topic please ,anybaody runnin one? I have seen II 13mm pumps that don't compare to my 12mm scheids pump so how does a II 14mm pump compare to a scheids 13mm pump I see the II 14mmm pump is only rated for 1000cc's seems low for a 14mm pump???
 
smokinrod said:
lets get back to the topic please ,anybaody runnin one? I have seen II 13mm pumps that don't compare to my 12mm scheids pump so how does a II 14mm pump compare to a scheids 13mm pump I see the II 14mmm pump is only rated for 1000cc's seems low for a 14mm pump???
Click to expand...

Cc's of flow from one builder to another doesn't mean much.... Its how the pump was tested, rpm, orfice size, line size, etc. I have seen pump shops quote 1000 cc's from a 215 pump with 12mm P&B's. Go with a shop that will set your pump up for the HP and RPM you want using your injectors.
 
Jetpilot said:
Cc's of flow from one builder to another doesn't mean much.... Its how the pump was tested, rpm, orfice size, line size, etc. I have seen pump shops quote 1000 cc's from a 215 pump with 12mm P&B's. Go with a shop that will set your pump up for the HP and RPM you want using your injectors.
Click to expand...
Yea I remeber the Urban Legand of a Sickly dyno queen that got 1000 cc's on a stock fueling section.:hehe:
 
You must log in or register to reply here.
Back
Top