new monster vp

Horsepower increase will vary truck to truck. The cam profile on the knew pump is more aggressive. The profile allows for more flow/fuel however tuneing is a necessary with the pump. You must also take care of this pump romping on throttle and lifting right off is very hard on these things leaves scoring on the case. Clean good fuel is another must good filtration systems!
 
Tuneing is up to each individual owner limit timing however. tune explore and find out the best combo for your truck
 
anyone of you guys running diff injectors with your monster pump.

im running his currently just curious if there was room for more fuel delivery
 
Mine will free rev past 4k.

I know there are more tricks in the latest pump But I've yet to see Anymore HP gained. Our platform With the VP and 24v ECM is near its limit. Not having the ability to get the ecms to fully fuel in the Higher r's is limiting hp. The reason I say that is we Need higher R's to spool larger charger/chargers for more air. Karl made 850 on fuel and ran an 11.01 on street tires(6500lbs). I think thats near its limit. Until we see more RPM I dont think were gonna see much more hp. I wish we could get the vp to fuel @ 4k like it does @ 2700LOL. I'll keep dreaming
 
I know for a fact it makes more horsepower I may not have a dyno sheet (I will in about 2 weeks) but I went faster when I simply changed pumps that right there tells me I gained HP.
 
yea i agree with ya on that high tech ram been thinking about gone to ppump for more rpms
 
HIGH TECH RAM said:
Faster e.t or mph? That is proof of power cant argue that.
Click to expand...


Faster through the traps and better ET. I don't actually no what it would have done at full potential my last 3 runs of the season last year i blew intercooler boots up and coasted at least 200 feet to the finish i also grenaded my oil filter on my last run after the piping blew out and one of the "bungs" for waste gates smacked it and torn it in 2. Hopefully have that all solved for this year and will have some dyno sheets in a few weeks to really compare. The pump flows 560+cc's it is very strong. We just need a 4k tune now and it would open some doors.
 
If you could get 560cc of fuel @ 4k The VP would be very difficult to beat. I'm gonna give it one more season of screwing with my combo. If I dont progress farther then I'm gonna be forced to go mechanical
 
No I got a different one seem to run ok around 60% I would like to dyno some more with it only pulled it like 8 times on the dyno
 
You must log in or register to reply here.
Back
Top