Jpscustoms New member Joined Feb 17, 2008 Messages 684 Feb 6, 2012 #141 Machine shop had to sleeve the bad cyl, decked pistons .015 too
RJM06590 What to do Joined Dec 16, 2009 Messages 1,913 Feb 6, 2012 #142 Was the ptw checked when first assembled?
Jpscustoms New member Joined Feb 17, 2008 Messages 684 Feb 6, 2012 #143 Im not sure the machine shop assembled it
Jpscustoms New member Joined Feb 17, 2008 Messages 684 Feb 8, 2012 #144 Got the head back on after gettin block and pistons fixed, check valve clearance and I'm at .038in and .088ex. Little tight on intake yet
Got the head back on after gettin block and pistons fixed, check valve clearance and I'm at .038in and .088ex. Little tight on intake yet
Jpscustoms New member Joined Feb 17, 2008 Messages 684 Feb 15, 2012 #145 Runs again, and no tick. Ended up having to back the cam up 2degrees. Thanks for the help and input
RJM06590 What to do Joined Dec 16, 2009 Messages 1,913 Feb 15, 2012 #147 Sweet man, my shortblock is in the truck and the rest will be on tomorrow.