Recent content by edgerat

  1. edgerat

    aftermarket heads?

    what is out there aside from chinese and alabama cylinder head? I am pretty much resigned to the fact that my stock head at 155k is cracked. Any shops out there like Scheid or Haisley sell a complete head all pimped out with 60lb springs and porting and machining done? what would a guy be...
  2. edgerat

    Wheelbase and its effect on pulling

    I finally have the motivation and money to turn my reg cab into a pulling truck. Big single, big pump, big RPM. Someone brought up the idea that because of the shorter wheelbase on my reg cab I may not be able to put as much power to the ground before overcoming the wheelbase of the truck from...
  3. edgerat

    is this alot?

    898hp on #2 only? :evil
  4. edgerat

    Mtec Ram HID headlight install w/pics

    As most owners know the factory headlights on non-sport 2nd gen trucks leave quite a bit to be desired as far as the lighting is concerned, safety is a concern as well since the stock bulbs barely illuminate enough of the road to see anything in front of you. I originally ordered the Vision HID...
  5. edgerat

    how many splines???

    I need a locker for the 94 2500 auto truck and I am seeing two options. Fritz's site says they are 35-spline but when I enter all the truck info at Summit it says 32-spline. Tell me I dont have to pull it apart to figure it out! Isaac
  6. edgerat

    7.3 turbo advice?

    I know nothing about Ferd turbles and I have a buddy that needs some help so educate me if you would... :) He has an 03 with a ts-chip, exhaust and intake, he tows a 6x14' enclosed trailer for work 5 days a week that is loaded with construction equipment, i.e. 12 skil saws, 12 nail guns, two...
  7. edgerat

    P-pump

    just like everybody else, I need a 180 or 215 pump please. :rockwoot:
  8. edgerat

    Bosch 330

    so if 370s add 100hp, how much hp do Bosch 330 injectors add???? :bang
  9. edgerat

    Dynomite Diesel

    as posted by Lenny on nwbombers: To show off our new show room and phone office we thought we would invite everyone out for another Dynoday. All vendors WELCOME to compete NOT to sell in our lot. Violators will go missing! Cost per entry in competition $50.00 Trophys awarded $1000.00 cash...
  10. edgerat

    PDR HX-40, Mach 2.5s, Airbulldog Hood

    PDR HX40-16wg $600 10k on it since it was built Mach 2.5s $500 10k on them no cores needed Airbulldog Hood painted graphite same hood that Fletcher ran or runs on his white truck $1000 hood was 1700dollars new and has been on the truck for 23k miles over the last four years. Has naca...
  11. edgerat

    um

    did anyone notice this is the 2nd GERERATION forum? LOL
Back
Top