JasonCzerak
Active member
- Joined
- Aug 10, 2006
- Messages
- 14,827
How/what is the weight bias? front/rear and cross section?
Yes we're doing a Ring/Pinion swap after the drag race/dyno.
We moved the battery closer to the starter and are rewiring some of the grounds to a "floating ground" so we don't have as much draw when starting the truck. Something we overlooked when originally wiring it.
Lyn is installing the two Shroud Parachutes today in prep for Saturday's 1/4 Mile test and tune session. Also we weighed the bedside as is with all the mounting hardware and frame and its 23lbs per side.
Yes we're doing a Ring/Pinion swap after the drag race/dyno.
We moved the battery closer to the starter and are rewiring some of the grounds to a "floating ground" so we don't have as much draw when starting the truck. Something we overlooked when originally wiring it.
Lyn is installing the two Shroud Parachutes today in prep for Saturday's 1/4 Mile test and tune session. Also we weighed the bedside as is with all the mounting hardware and frame and its 23lbs per side.
No, stock brakes won't fit with 16" rims. We also saved 120lbs with these brakes and half of that is rotating weight.
Rear weighs 1410 front is around 3130, that makes it about 70% front 30% rear
So. Firepunk did the thing. Time to rethink that 8.5 cage.
Where was this at?