Firepunk UCC Pro Street Build

Yes we're doing a Ring/Pinion swap after the drag race/dyno.

We moved the battery closer to the starter and are rewiring some of the grounds to a "floating ground" so we don't have as much draw when starting the truck. Something we overlooked when originally wiring it.

Lyn is installing the two Shroud Parachutes today in prep for Saturday's 1/4 Mile test and tune session. Also we weighed the bedside as is with all the mounting hardware and frame and its 23lbs per side.
Chutes_zpsfm59vbxf.jpg


What size wire is in the truck going to the starter?
 
Yes we're doing a Ring/Pinion swap after the drag race/dyno.

We moved the battery closer to the starter and are rewiring some of the grounds to a "floating ground" so we don't have as much draw when starting the truck. Something we overlooked when originally wiring it.

Lyn is installing the two Shroud Parachutes today in prep for Saturday's 1/4 Mile test and tune session. Also we weighed the bedside as is with all the mounting hardware and frame and its 23lbs per side.
Chutes_zpsfm59vbxf.jpg

I like the way you mounted the bedsides.
 
Any intention to swap the stock brakes on and see if the claim is true at some point?
 
No, stock brakes won't fit with 16" rims. We also saved 120lbs with these brakes and half of that is rotating weight.

Rear weighs 1410 front is around 3130, that makes it about 70% front 30% rear
 
No, stock brakes won't fit with 16" rims. We also saved 120lbs with these brakes and half of that is rotating weight.

Rear weighs 1410 front is around 3130, that makes it about 70% front 30% rear

That's very interesting that it's the same weight bias percentage a typical truck with some basic weight savings (remove tailgate, spare, etc).
 
So. Firepunk did the thing. Time to rethink that 8.5 cage.

12495079_10153014695917168_2814953625477385501_n_zpso5z0vfjk.jpg
 
Last edited:
1.36 on the 60... thought it would be a bit better. either way thats a GREAT number.
 
WOW!, congrats Firepunk crew. Truly amazing, I can't wait to watch it run. Totally new level.
 
NVM. That is a very quick looking 60'. Especially if that's first hit at the 1320 on it. I recant my previous statement.
 
Correct, 1st 1/4 mile pass on the Truck. Going to bump another 200hp in it and see if we can stick the power.

Lavon
 
Daaanngggg

Just so you know, I'm not as smart as I think I am.
 
Back
Top