duramaxcummins
Chevy Cummins
- Joined
- May 18, 2008
- Messages
- 93
I have a fully custom 2001 chevy ext cab short bed with a 12 valve cummins engine it. The frame of the truck is a 97 dodge cummins frame along with front axle, transmission, transfercase and engine ofcourse. The rear axle is a 1 ton gm axle. The truck has been hooked to sled one time and that was only with a 450 hp clutch. I have a 750hp sb clutch comming along with the updated input shaft for the nv4500, so it will have a new one of those in it. The engine from bottom to top, fully studded bottom end, mains and rods, molley std size bore pistons, kdp kit, helix 2 cam, pdp freeze plugs, electric water pump, haisley machine front billet cover, the head is stock with 60lb springs. I put the head on just to run the truck to see what my twins would do. The twins are a bd s300 with a c 9 cat turbo. The twins have no problem getting lit. The original idea was to than take the head back off, buy a new one, get it o ringed and stud the head. I have the studs, just didnt go the distance to buying a new head and o ringing it. Those will go with the truck. The p pump was a schied pump, however i do not know what has been done to it completly. I bought it used from a fella on here, from that there is .093 stainless lines to 5x.18 injectors. I would say the truck does have atleast 600hp. On the inside, this truck has leather, electric seats, has 06 tow mirrors, the gauges are custom. The gauges come from Dakota digital, along with the 100psi boost gauge. Heres things the truck will need, I havnt gotten the modual to hook up the tack for the dakota digital gauges, thats 100 bucks, doesnt have a good egt gauge, fuel level sender needs wired up, along with speedometer. everything else is hooked up, oil, alt ect. Im wanting 10,000 for the truck obo, i will also trade it for a 03 or newer std cab longbed truck. I have pictures as i was building this truck, along with pictures of how it looks now. I have 4 new tires and rims on the truck but those will not go with it. I will prob buy a set of used aluminum rims and tires to put on the truck. If someone needs pictures, give me your emails, thanks for lookin! 2604170113 is my number, truck probably hasnt even seen 1000 miles on engine yet. Its located in ohio, zip code 45874.
