62/71/13ss vs. 66/71/13ss, why is there a difference in lag

Heres my new 66/68/13ss with race cover from ED. Cant wait to see how it does!!!
:rockwoot:
 

Attachments

  • New turbo.jpg
    New turbo.jpg
    38.9 KB · Views: 137
arrrrrrggggghhhhh i can't wait! i get mine early next week!!!!!!!!!!!!!!!!! it looks awsome! almost too good to touch!(almost...)
 
kjpcummins said:
Its the 64/68 that doesnt work worth very well a 66/68 works great like the 62/68 but instead of getting the ss housing i would just buy a manifold blanket and turbo sock
Click to expand...

Yeah after some sleep. I now remember it was the 64.:bang
 
BgBlDodge said:
They make these little things called sleeping pills. LOL

Just talked to quadzilla and the turbo timer module on my ADR was burnt and they don't know why. Said it's quite possible it may have damaged some of the tracers to the fueling module so my box may not have been fueling at all. I've run the latest tune on the box (the one that says you have to run to keep it from melting the box) since the day I bought it and I've never used the turbo timer or egt or high idle feature on the box so I don't know why it's burnt up either. Jeremy is going to take a look at it today and get back with me and we'll go from there. Who knows how long ago this thing burnt. The box hasn't given me any problems since I bought it.
Click to expand...

I'll get enough when I die. Lifes to short for sleep.

Good luck on the box. Maybe you'll get it figured out.
 
Pinion Twister said:
Heres my new 66/68/13ss with race cover from ED. Cant wait to see how it does!!!
:rockwoot:
Click to expand...

Damn keith i think you may of convinced my to get one just by looking at yours!!! Did you send a turbo in for them to make this turbo or did they start from scratch? Let me know how it runs! Oh and if you wouldnt pm me a price what one would cost.
 
yoshi470 said:
Damn keith i think you may of convinced my to get one just by looking at yours!!! Did you send a turbo in for them to make this turbo or did they start from scratch? Let me know how it runs! Oh and if you wouldnt pm me a price what one would cost.
Click to expand...

I sent a 62/65/14 I had laying around to them. They did a race cover, "super62" wheel, 68mm turbine wheel, milling, their wastegate actuator rod and all the balancing for $600.

HTT wanted $500 just to do a 71mm turbine wheel.

Heres a pic with my goofy kids.

The S475 will be going out hopefully next week to E.D.. Chris is going to do either a 77 or 78 comp. wheel with a 1.10? turbine housing and a race cover.
He said that twins kit should put me close to 800 if not more.
 

Attachments

  • 6268turbo.jpg
    6268turbo.jpg
    44 KB · Views: 55
yea i think i may just send my 62 into chris and have him put the 66 wheel on, race cover and the 68 turbine wheel. Looking forward to seeing what pinion twister has to say about his once he gets it on
 
yoshi470 said:
Damn keith i think you may of convinced my to get one just by looking at yours!!! Did you send a turbo in for them to make this turbo or did they start from scratch? Let me know how it runs! Oh and if you wouldnt pm me a price what one would cost.
Click to expand...

I sold my B-1 and started with all new.
Waiting on some fuel parts so it might be a few days before i get it going.
I cant wait!!
Keith
 
newb question here guys.... what exactly is a race cover? its not just a polished housing iam assuming.... just wonderin, never quite caught on to what it is
 
Talked to Justin at quadzilla today. My turbo timer module burned all the way through the board and took out the tracers to the pulse width module, A.K.A, I wasn't getting any extra fueling from the wire tap. So they are going to install their brand new 4k ready board with bigger and beefier parts on it for $100 (no warranty since I didn't send in the warranty card and it's been over a year). Now I really can't wait till I get this box back and slapped on the truck. :D
 
BgBlDodge said:
Talked to Justin at quadzilla today. My turbo timer module burned all the way through the board and took out the tracers to the pulse width module, A.K.A, I wasn't getting any extra fueling from the wire tap. So they are going to install their brand new 4k ready board with bigger and beefier parts on it for $100 (no warranty since I didn't send in the warranty card and it's been over a year). Now I really can't wait till I get this box back and slapped on the truck. :D
Click to expand...

That is awesome! A fuel tap should bring that truck alive...be 400hp in no time. Keep up the good work little guy, you'll catch up.:hehe:
 
You must log in or register to reply here.
Back
Top