Kick Start
Banned
- Joined
- Feb 25, 2009
- Messages
- 3,173
Nobody gives a damn which of you have the bigger dick.
Can we get back to discussing the turbos.
Can we get back to discussing the turbos.
I offer them, as well as factual information, which you may have noticed from this thread.
I offer them, as well as factual information, which you may have noticed from this thread.
Which info? Pissing match above aside with others, are the covers available in 3" v band? Without needing machining from second party.
Does the housing have to be machined?
Read farther back in the thread, there was a decent discussion about these turbos aside from the flange/elbow. There is an available flange adapter to mate to the factory cast elbow used on the 2nd Gen applications, or the elbow as shown previously in either 2.75" or 3.00" hose outlets.
The elbow and clamp work with the factory SX-E cover, no machining is required.
Picture of the flange adapter.
![]()
I should add that the elbow/clamp is actually cheaper than the flange adapter.
Its an awesome housing. Agp cast's it in house.Has anyone tried this turbine housing ? I'm looking to run this with an s480![]()
Sent from my iPhone using Tapatalk
Got a 64.5 on the way.