Pro Street 1/2 Ton Suspension Conversion

[Signature600]

WTF is wrong with my avatar god $&@! Moderators

Don't feel bad...they got me too!

Chris

 

[TMONEYDIESEL]

LOL sorry chris, Duallie I don't think this is funny STOP LAUGHING

 

[massdiesel]

Flaming river for a mustang!!!!

 

[Ether Man]

Please inform us how You clean the pump? oke:

With paint remover?

i would also like to know how to get a pump that clean.

 

[RacinDuallie]

hehehe wow- everybody wants a clean pump! :hehe: :hehe:


I better not show the pump body that I am polishing........:rockwoot:

 

[RacinDuallie]

Flaming river for a mustang!!!!

Thanks Scott !

 

[TMONEYDIESEL]

Easy to clean em guys just get some paint remover and some strong chems and clean and swab and clean and swab

 

[Signature600]

Flaming river for a mustang!!!!

THANKS!!!!

Looks Awesome...any pics of the steering shaft routing? I had a CR 2wd rack for mine...it would have fit, but would have been tough!

Chris

 

[Rollin Coal]

what year mustang, summit has about 15 different part numbers for the same years too.

Thanks

 

[RacinDuallie]

what year mustang, summit has about 15 different part numbers for the same years too.

Thanks

X2 ~!!!!!!!oke:

 

[massdiesel]

rack

Was a rack for a 1988 mustang gt

 

[WUnderwood]

WTF is wrong with my avatar god $&@! Moderators

hilarious...

 

[RacinDuallie]

Was a rack for a 1988 mustang gt

Thanks for the pics Scott. I'll see if'n I can get this figured out with part numbers.

 

[Signature600]

LOOKS AWESOME SCOTT!!

Thanks for the pics...now I know what I'm doing with mine for sure!

I assume it's a manual rack?
Chris

 

[massdiesel]

Yes it is

 

[RacinDuallie]

Well get to work, I wanna see pics.

Bumping thread back up to see where your at also- and to update my project....:Cheer:


Removed heater box assembly, cleaned and sprayed some bedliner spray....

Stripped drivers side to bare metal then primed. Have some smoothing to do before the black epoxy coat....

I laugh at this hitch everytime :hehe::hehe:

Ok so what'd you get done?oke:oke:

 

[9 LIVES]

Did you sand it all the way down before you shot that primer? or just sand off the clear coat?

 

[joefarmer]

Looking good, except the bedliner spray is too heavy. LOL

 

[RacinDuallie]

Did you sand it all the way down before you shot that primer? or just sand off the clear coat?

If you look back in the pics posted you can see I stripped off everything to bare steel....

I use some Norton Rapid Strip Discs (blue)- and a milwalkie grinder... You can get the Rapid Strip Discs at Hope Depot.....

When done use blow gun to blow off everything- twice- then use acetone soaked rag to wipe down- then use air gun again- start shooting primer. I use a SharpeSGF 98 HVLP gun with a 1.5mm tip. Triple filtered air supply.:rockwoot:

 

[RacinDuallie]

Looking good, except the bedliner spray is too heavy. LOL

:hehe::hehe:I figured there was some wiggle room on the diet plan to add some "clean up in a can" (bedliner spray) :hehe::hehe:

It does clean up the interior a bunch.:rockwoot: