Recent content by jktcummins

Its been almost 2 years since i have touched my truck or even really been on here. I was just wondering if there has been any new break through stuff for us VP guys.

Ok I just bought a 95 with an auto. It has not been wanting to lock converter or **** into OD. I found that apparently the wires have been torn out and are patched together. There is also a temp sensor just wire tied to the frame. First off where does the temp sensor go in the trans. I haven't...

2002 24valve motor had 160,000 mile. ran when parked but the coons chewed the wiring harness up and I could not get it running before i pull it out. The oil looked great and it turns over fine. It is just motor with inj. pump and lines. I do have a lot of other stuff that i will sell...

I have a singel cab 1995 dodge 4x4 auto. It is green and silver. The it is in overall good shape. It was a bank repo and i know the guy that owned it. It was in his family from day one. It has 375,000 miles trans was rebuild 5 years ago and still holds good. The interior is durty but in...

Alright guys i am just throwing this out there. The GOLDDIGGER might be forsale. Right now it has on it. 150,000miles Ported and oringed head Haisley street puller cam Dragon fire VP 6x.018 injectors FASS 150 Dipricol guages 100psi boost 100psi fuel 2000deg pyro Redline Smarty stainless fuel...

I have a 2002 chab and chassis. Have fenders, doors windows, engine parts, intercoolers, front solid axle, springs, frame, seats, door panels, and much much more. Best be is to email me since i am not on very much at all anymore. justintrimble@hotmail.com

I have a 2008 ford dually king ranch 4x4 truck I really need to sell. 110,000 miles S&B cold air intake MBRP dpf delet exhaust H&S Mini Maxx tuner New Hancook Dyna pro A/T tires C&M ER model steel flat bed cost $5500 new Southwest Fabricators custom front bumper It is the king ranch edition so...

I have two injector pumps for a 4BT. VE style pump with front cover pump gear and lines Make Offer!!!! Ag style inline pump with front cover pump gear and lines. Make Offer!!!! Need to get them off the shelf and out of the shop. Both need to be gone through. The VE pump was fine when i...

This is a Built dana 70 witha detroit locker, Mouser Axles. It was just gone through with new carrier bearings, New ring and pinion from Motive gear. The rear end might have 50 miles on it. It would make a perfect rear end for a drag truck or a 500hp Daily driver. I WILL BE AT SCHIEDS THIS...

I have a Dragon fire VP pump that doesnt even have 500miles on it. Maybe 10 1/4mile passes, 2 sled pulls, and 6 or 7 dyno runs on it. It has had a FASS with 16-18psi of fuel behind it the entire time. Has never been run out of fuel. The truck made 825hp with a 100hp shot of juice on it on...

Is anyone looking for a full billet trans billet input, intermediate, and two piece output? Trans has 0 miles on fresh rebuild and new billet intermediate. Every thing in the trans is ATS including the 5star converter. It would have to go with the tcase because of the two piece output. The...

How are y'all hooking up kill switches on a vp? I am assuming that the majority are just tapping into the engine harness and just shutting power off to the pump am I correct? If so what wire are you using?

Ok lets talk drive shafts. There is not decent info that i can find as to what works and what doesnt. On a ex cab long box truck you have around 70" from the yoke on the transmission to the yoke on the diff. From what I have gathered you cant get away with running a one piece shaft for drag...

I know this is a stupid question but I'm not around my truck and I need to get my driveshaft shortened tommorow so I can get my dana80 swap finished this weekend. How much does it need to be shortened on a ex cab auto going from a 70 to an 80. Everyone says about an inch. Well is that exactly an...

I have been trying to get ahold of chris about my turbo. I got a pull comming up pretty quick. Can anyone help????