Recent content by PSDPlayer

  1. PSDPlayer

    Improved 6.4L & 6.0L Motorcraft Diesel Fuel Filters

    Fuel filters used in production 6.4L engines have begun using an improved fuel filter to reduce fuel 'blow by' when the filter is at the end of its filtering capability (when the filter is nearly clogged and needs changing). • The major change is a gasket installed on the end cap of the primary...
  2. PSDPlayer

    Improved 6.4L & 6.0L Motorcraft Diesel Fuel Filters

    Fuel filters used in production 6.4L engines have begun using an improved fuel filter to reduce fuel 'blow by' when the filter is at the end of its filtering capability (when the filter is nearly clogged and needs changing). • The major change is a gasket installed on the end cap of the primary...
  3. PSDPlayer

    SFI Bellhousings for Torqshift.

    So since I would be needing an SFI bellhousing for a Torqshift. I went ahead and made one. This is the 5R110 Bellhousing being printed in plastic for it to be cast into aluminum to be sent out for SFI approval. This bellhousing will allow compliance for NHRA to actually run at one of there...
  4. PSDPlayer

    SFI Approved bellhousings.

    So since I would be needing an SFI bellhousing for a Torqshift. I went ahead and made one. This is the 5R110 Bellhousing being printed in plastic for it to be cast into aluminum to be sent out for SFI approval. This bellhousing will allow compliance for NHRA to actually run at one of there...
  5. PSDPlayer

    Fuel line ID Sizes.

    Because people think I'm biased against DJ and his bull****+ fuel kit. I figured I would just go get the set of digital calipers out and measure some stuff. Yup, I'm an asshole. But I guess I might have been right that the factory line was larger. :bang Factory fuel line ID size at the...
  6. PSDPlayer

    GoGoDiesel Stage 1 Offroad Intake Manifold

    The EGR system is completely removed. This is not just to remove the cooler. A little see through action... The EGR valve and internal ports are completely removed. Coolant goes back to the bottle. No more having coolant still go through the intake like every other kit on the market...
  7. PSDPlayer

    Viair compressor sale

    Just stopped over at Hornblasters to have some breakfast with Matt. Matt was busy moving around pallets of Viair compressors. Since he buys like a tractor trailer load at a time and I know all you guys are always looking for a deal on tanks and compressors and stuff I told him I would put the...
  8. PSDPlayer

    6.0l Diesel Calibration Update - Various Issues

    This article supersedes TSB 07-5-4 to update the calibration level. ISSUE: Some 2003-2007 F-Super Duty vehicles, 2003-2005 Excursions and 2004-2008 E-Series vehicles, equipped with a 6.0L diesel engine may exhibit hard start, no start, white smoke, lack of power, running rough condition after...
  9. PSDPlayer

    Fun in the land of solidworks...

    Anyone need a copper head gasket? I wonder what it would look like sitting on the block...
  10. PSDPlayer

    Dex's Intermediate Shaft

    A little screen shot of the intermediate shaft for Dex's 48RE build next week. His input shaft is made from Unobanium. The Intermediate shaft will be made from GoGoTanium. It's a special blending of metals heat treated, but instead of quenching with oil, Rockstar energy drink is used.
  11. PSDPlayer

    Dex's (BFD99) Input Shaft

    Here is the Solidworks drawing of the input shaft that will be made for Dex's transmission. It will be cut from Unobtanium. Involute Splines will be put on the ends of the shaft using special cutters developed from metals heat treated with the fires from Hell. (I keep a little box of Hell Fire...
  12. PSDPlayer

    sketch. revolve. change plane. sketch. extrude cut. change plane. sketch extrude.

    So I have been playing with Solidworks. Took a screen shot of a partial drawing of a 6.4L piston. Pretty easy stuff to play with. Now I can put this into Mastercam and generate the tool paths so I can CNC the back sides instead of doing it by hand. Make them all weigh the same.
  13. PSDPlayer

    If a woodchuck could "chuck" aluminum...

    So I found a rusted old rotary table. And then found a rusted el cheapo 3 jaw chuck. Had my buddy fire up the cnc lathe and make an aluminum plug to center one on the other. Then grabbed a custom carbide ball mill, because it was the only thing long enough that wasn't in the cnc mill...
  14. PSDPlayer

    6.4l Diesel Engines Built 5/14/2008 Through 11/7/2008

    Some 2008 And Early 2009 F-super Duty Vehicles Equipped With The 6.4l Diesel Engines Built May 14, 2008 Through November 7, 2008 May Exhibit Various Drivability Symptoms Including Excessive Oil Level (verify With The Short Stick Method Located In The Pced Diagnostic Subroutines), Engine...
  15. PSDPlayer

    Revised Gas/diesel Engine De-gas Bottle Cap Available In Service

    If Degas Bottle Cap Replacement Is Necessary, A Revised Gas/diesel Engine Degas Bottle Cap, Part Number(9c3z-8101-a) Is Available In Service - For 2004-2009 Econoline, 2003-2007 Super-duty And 2003-2005 Excursions Equipped With 6.0l Diesel Engines, And 2008-2009 Super-duty Equipped With 5.4l...
Back
Top