Recent content by SuperDave4x4

I'm going to look at a 2011 6.7 f250 4x4 Lariat tomorrow evening. It has 77k and appears to be in good condition. Dealer is asking 38950 which is kind of high to me but he said he could work with me on the price. I'd like to get it around 35ish if at all possible. Is there anything I...

I'm looking at a 2010 6.7 in Illinois but not sure what issues those trucks are having. Can y'all school me on the 6.7? I plan on keeping the truck stock besides an intake and exhaust. Here is the truck...

My old school AirDog150 seems to be weaking. I'm not really sure why, but it started losing a little bit of pressure a few months ago. I changed the filters recently so I don't think that's a problem. Perhaps the spring is weakening? Anyways, if I can't get this thing back to normal I'm...

Am I missing something? 99 with ABS and 4x4 for $80 and a 2 year warranty? http://www.1aauto.com/1A/front-wheel-bearings-and-hubs/Dodge/Ram-2500-Truck/1ASHF00112/380866/1999

It's FINALLY almost time! After many years of waiting and saving and spending what little money I had saved on repairs to the truck, I've finally kept it together long enough to be able to order some parts over the past several months. Now this isn't a monster set up with and s595 or anything...

Has anyone removed the ball and spring style regulator from an AirDog 1 150gph and installed an adjustable regulator? I mean the regulator could be as crude has a 1/4 turn ball valve, right? My pressure on my old school air dog is a few psi lower than I want and I could shim the spring with a...

Looking to order a 2 Universal Gauge mounts for my overall boost pressure and drive pressure, but not sure which mount to get. I've already got a 3 gauge pillar mount and a steering column mount. I was looking at these two linked below. They will more than likely be mounted on the dash next to...

Riding down the road yesterday my CEL came on and my RPM gauge stopped working, but when I came to a stop the engine acted as if I blipped the throttle 4 times in a row. I was completely stopped and no where near the go pedal. I pulled over and shut the truck off and let it sit for 2 or 3...

Need some guidance on how to wire these bastards up. The instructions show 2 wires and of course the kit has 3. Two reds and two blacks but the two black wires are connected to one pin. I've put the black wire in the center and the two reds on either side of the black wire. (These is the...

Has anyone bought these? Yes, they are a bit expensive, but look nice. THe second link has more pictures of the 2nd Gen projectors. 2nd Gen Dodge Ram HID Projector Retrofitted Headlamps 2nd Gen - Painted Satin Black - Projectors

Like the name says I'm looking for a factory Dodge Ram 2500/3500 receiver hitch. PM or Email: Driv2049@aol.com

Just like clock work. I finally get a nest egg saved up and problems hit the truck. I'm getting a slight vibration under normal acceleration. It's noticeable most at 25-35 mph under light throttle and seems to go away once i pass 35mph. Today was the worst that its done it and I started to...

Checked my oil level last night and when I did it showed oil about 2" above the "safe" mark. I checked the coolant level and it is low. The oil doesn't look milky or abnormal. Under normal driving conditions my coolant temps are fine. I DD the truck so it doesn't get romped on very hard. Any...

Well I bought the injectors that are in my truck now back in 2006 from Scott over at Mass Diesel. They were used with about a 1000 miles on them or so and I'm wondering if they need to be removed and sent off to be cleaned? I thought about replacing them all together, but would I come out ahead...

Well I think I'm going to make my own traction bars. I had planned on buying some prefabbed, but I can make them for less. It will take longer, but I'll save some money. I guess my question is: Are Cat 1 Toplinks that bad to use? I can spend 50 bucks on top links or I can spend 280 on...