Recent content by stackx2

I am trying to wire up my neutral safety switch off of the center pin on the transmission but I am not sure where to wire it to. In my mind I am thinking that it needs to be off of the starter relay ground, but I don't know which wire that is. I have done quite a bit of searching and I am...

Does anyone have a source for a wastegate block off for the new style raised wastegate divider? I just got my new mani and am not ready to run twins yet so I don't need the wastegate at the moment. Thanks

Looking for a set of 12v p pump 5x18 sac injectors. New or good used. Thanks

As the title states, I'm looking for a 83/.90 t4 for my s472. Preferably new but used is fine. I'm in N . California. Thanks, John.

I have got a John Deere 310g backhoe at work that has 5k hrs on it and is running a little low on power for digging. It has a 4 cyl stanadyne pump on it but I'm not sure of the model number though. Is there any way to turn it back up to stock power? I've seen on some of the older pumps they...

I have a full set of stock lb7 core injectors that came out of a running 01 with 102,000 miles. The truck was having a hard starting issue but other than that it ran fine. I'm looking for $500 to your door. I am more than willing to negotiate on the price. Just shoot me an offer. Thanks, John...

Hey guys, I just bought a new to me 08 6.7 Laramie mega cab and i am having a really frustrating issue with it. I am getting a p0106 code that says it is map sensor performance. When I drive down the highway a red lightning bolt on the dash will come up and the check engine light will ding and...

I got these from a friend of mine, he said they were out of a john deere pump and were around the size of a 191. What do you guys think? The shoulder height says 1.71 and the numbers on the dv's are 052/105. Thanks guys! John

Here's is the one I fabbed up for RonA's truck. It was a tight fit! John

I am needing the last 8 of the vin on an 08 Laramie mega cab. I am upgrading some of the interior on my 08 sxt and I am wanting to compare part numbers between the two vins at dodge. Then I can see what I need to replace or keep. Thanks guys. John

Here ya go! From the back From the front A close up of the pin John

I thought you guys might like this so here it is. I just bought a new 08 mega cab about a month ago and I needed a 5th wheel hitch for it to tow our camper to the coast. The truck came with a b&w gooseneck hitch already and I didn't want to drill any more holes in the bed to add rails for my...

Does anyone know of a source for the quick connect fittings for testing fuel pressures. The part # is 3164621 and Cummins wants $128 for one! It looks almost identical to an air hose coupler. I've search Google with that number and it just comes up as different parts. Thanks guys! John

I found a mildly built 47rh an a parts truck and the guy wants to trade for my getrag. I will have everything in the 95 parts truck to do the swap and already have a ppump so all the cables will work but what my concern is the transfer case and the drive shaft length. Will my 29 spline 205 bolt...

A friend (not really) came over and had enough blow by to pop the oil fill cap off so we pulled the head and found #1 piston had a grove up the side of it. He said that the truck was running fine one day and the next it kept blowing the cap off. What might have caused this? The truck has new...