Recent content by 2001cumminsman

I’m doing a rebuild on a 47re that was built back in 2009 by John @ floor it diesel. I ordered a 650hp kit from the guys at power driven. This is my first rebuild on a trans by the way so forgive my ignorance. Anyways my question is I’m sure the kit I’ll get from power driven will have a...

Bought a 06 efi live tuned already from a friend (engine blown). If sat for 5 years so my buddy doesn’t remember sh*t about if, long story short I rebuilt it and threw in dfi 100horse injectors 67mm taterbuilt he351, it’s still tuned with efi live from atp trucks, buddy said it was tuned for a...

I put the 12v gear case on for the p pump swap, one of the protrusions off the case from the bolt of the cam sensor adapter (timing pin setup) was hitting the cam gear.. And after that I got to looking at the rest of the case and it was protruding more than the cam sensor so needless to say I...

To backtrack a little I'm not 100% sure what "billet" parts are in this transmission as I never received paperwork on it. I do know it's a dpc tripple disc converter, and that's about it besides my modifications to the valve body which consisted of a Suncoast governor pressure solenoid and...

I need some help diagnosing my 47re, long story short I picked up a supposed to be built trans from a buddy (he didn't have paperwork) but I trusted him so thought I'd be fine. Got it in and the shifts aren't as hard as my last built transmission but shifts 1-3 fine, but it will not go into...

It's off of a John Deere 9640, my buddy asked me if I want it to use in a possible twin kit, I haven't personally seen it yet. But he sent me a pic of the BW tag and it has a 1.32 exhaust housing. Anyways has anyone had any experience with them?

Anybody running contagious diesel injectors? If so, how big? And how much air are you pushing?

Exactly what the title says I'm looking for anything to do with a p pump conversion... as far as the pump goes im lookin for a 215 pump or anything custom thats made. Hit me up call or txt 719-688-8873

Can someone point me in the direction of a thread breaking down injector sizing ex. 6X.018=hp or LPM? Or an equation of some sort...

Control pod on the adr quit workin (not pulse) so i ordered a new one and while I was waiting on the pod I installed my nos and used it once or twice to help spool the truck at the line. I received the new pod an put it in and now the truck just doesnt have the top end it used too... I can tell...

144k miles Asking $18,000 Located in southeastern Colorado Performance mods: F1 Mach 5s Fass 150 Adrenaline, 3000 tune on it now BD Rad box Cooling mist W/M Custom intake horn S&B CAI Super B Special Arp Head studs Floor It Diesel tranny (Billet flexplate, Billet input and output, Tq converter...

Long story short I had called mike and talked to him numerous times, I then buy a "monster pump" and mikes injectors, pump needed rebuilt, injectors needed cleaned/pop tested, sent them to him call him once more he said that he recieved them an that i need to call him the following week to see...

How much of a shot can be used? use it off the line or middle track? i realize nos will increase cylinder pressure do i need to retard timing to keep the headgasket from blowing seeing as the head isnt o ringed? what is the rpm range that it can be used without tearing anything up, do i need a...

Rocken, Tech, diesel, fuel, injection, 13, 16, mm, performance, plungers, barrels, delivery, valves I read that rocken tech makes 16mm plunger barrel upgrades for p pumps, I dont understand pumps much but what i do understand is that these plunger and barrels will let the pump flow 1500cc of...

anything special i need to spin 4k rpms while pulling the sled? also what do you guys do when sled pullin 4 lo or 4hi, ive been using 4 lo and eliminating the od, i was wonderin about putin it in 4hi and dropin it all the way down into 1st?....